| Part No. |
Description |
Techanical Specification |
Qty |
Remark |
| Vessel |
Extraction Vessel |
Volume: 400L Designed Pressure: 35MPa, working Pressure: 32MPa Designed temperature： 85℃ Basket Volume: 550L |
3 |
With watering jacket, setting pressure detection point and temperature detectio point at the inlet/outlet. Can control the temperture and pressure inside the extraction vessel automatically, the pressure in the extractor is always in the range of the extraction process parameters, and there are temperature and pressure sensor set on the CO2 pipe line entrance and exit. the working temperature is 10-80 ℃ |
| opening device of extraction vessel |
|
3 |
Clamp-type hydraulic quick open structure and is equipped with safety interlock mechanism |
| #1 Separation Vessel |
Volume: 300L Designed Pressure： 20MPa, Working Pressure: 18Mpa, Designed Temperature: 85 ℃ |
1 |
Equipped with the water jacket, there are safety valve, exhaust valve, pressure gauge at the outlet end of the vessel, there are extended tangential air inlet on top of the vessel. And set the temperature detection point at the inlet end, can control the temperature of the CO2. |
| #2 Separation Vessel |
Volume: 200L Designed Pressure： 12MPa, Working Pressure: 11Mpa, Designed Temperature: 85 ℃ |
1 |
Equipped with the water jacket, there are safety valve, exhaust valve, pressure gauge at the outlet end of the vessel, there are extended tangential air inlet on top of the vessel. And set the temperature detection point at the inlet end, can control the temperature of the CO2. |
| Fractionating Tower |
Volume: 400L Designed Pressure： 35MPa, Working Pressure: 32Mpa, Designed Temperature: 85 ℃ Total 4 section |
1 |
Equipped with the water jacket, there are safety valve, exhaust valve, pressure gauge at the outlet end of the vessel, there are extended tangential air inlet on top of the vessel. And set the temperature detection point at the inlet end, can control the temperature of the CO2. (make the distillation position range according to the process |
| intermediate Tank |
Volume: 300L Designed Pressure： 9.8MPa, Designed Temperature: 5-55 ℃ |
1 |
made by stainless steel 304, equipped with live level indicator, outfall evacuation port, safety valve, pressure gauge, temperature sensor interface at CO2 inlet and outlet, and equipped with heat(cooling) water jacket, make sure the tank is always in the liquid CO2 temperature. |
| Tall Gas Tank |
300L, 9.9Mpa |
1 |
made by stainless steel 304 |
| outdoor CO2 Tank |
Designed Pressure: 2.26Mpa, Working Pressure: 2.16Mpa, Volume: 30m3, Inner tube material: 16MnDr |
1 |
Vacuum double layer pearly sand insulation, Vertical Cryogenic tank |
| Valve |
High Pressure Control Valve |
35Mpa, 20Mpa |
4 |
Original Brand Emerson, Pneumatic Control, Material： SS304 |
| High Pressure Shut-off Valve |
Pressure: 5-55Mpa |
material: SS304 |
| Ball Valve(Water Line) |
|
material: SS304 |
| Solenoid Valve |
Control the water temperature |
DC24V |
| Safety Valve |
|
material: SS304 |
| Check Valve |
|
material: SS304 |
| pipe line |
High Pressure Pipe Line |
Extraction seperation pressure piping |
|
material: SS304 |
| Low Pressure Pipe Line |
process water piping |
|
material: SS304 |
| Fitting |
Elbows, reducers, union,Three-way joints, pressure(unpressurized) flanges, bolts, nuts, soft pick etc. |
|
material: SS304 |
| pump and air Compressor |
CO2 High Pressure Pump |
Max Flow Rate: 5000l/h, outlet pressure: 35MPa |
|
China made, flow rate fequency adjustment ceramic plunger, self circulation cooling pump, the pump head with a cooling system, over current protection, material is ss304 |
| Carry Agent pump |
Max flow rate: 400L/H, outlet pressure: 35Ma |
1 |
China made, flow rate fequency adjustment over current protection, material is ss304 |
| CO2 Transportation pump |
Max flow rate: 900L/H, outlet pressure: 8Ma |
1 |
China made, flow rate fequency adjustment over current protection, material is ss304 |
| Cooling water pump |
|
3 |
Cooling water circle |
| Cooling water pump |
|
3 |
Hot water circle |
| Recovery compressor |
inlet pressure: 6MPa |
1 |
China made, over current protection, material is ss304 |
| Air Compressor |
Discharge rate 0.5M3 |
1 |
|
| Cooling System |
Water Chiller |
Cooling capacity of 150,000 Kcal |
1 |
Water-cooled compressor |
| Cold Water Tank |
2m3 |
1 |
material: SS304 |
| Condenser |
Designed pressure: 9.8MPa. Working pressure: 9MPA |
1 |
material: SS304 |
| Heating System |
Extraction Heaters |
Designed Pressure: 35MPa, Working Pressure: 32MPa |
2 |
material: SS304 |
| Heater for #1 Separation |
Designed Pressure: 20MPa, Working Pressure: 18MPa |
1 |
material: SS304 |
| Heater for #2 Separation |
Designed Pressure: 12MPa, Working Pressure: 11MPa |
1 |
material: SS304 |
| Electric Heating Boilers |
|
1 |
including soft water treatment device |
| Hot water tank |
2m3 |
1 |
material: SS304 |
|
Hoist |
2.5T |
1 |
Chain Hoist |
| Control System |
PLC Control System |
With Control Software, Control Program |
1 |
Siemens |
| Lower voltage electric parts |
include circuit breakers, contactors, inverters, etc |
1 |
Delt Inverter 2 Pcs |